NTN BD155-1WSA angular contact ball bearings

A:66 mm; s1:36.95 mm; T max.:200 °C; A1:33 mm; H2:125 mm; N:M16; Recommended tightening torque for set screw:16.8 Nm; Designation of housing:PA211-; B:32.5 mm; H1:14 mm;

da max:81 mm; db min:70 mm; Ce min:8 mm; Da max:112 mm; Y0:2.4; d:65 mm; Min operating temperature, Tmin:-20 °C; da min:73 mm; Mass:1.4 kg; Y1:2.3;

Radial clearance class:C3; rs min:2.1 mm; da max:80.5 mm; f0:13.2; Da max:119 mm; Characteristic cage frequency, FTF:0.38 Hz; Static load, C0:52 kN; Dynamic load, C:82 kN; B:31 mm; Characteristic outer ring frequency, BPF0:3.07 Hz;

T min.:-20 °C; C:19.5 kN; B1:35.7 mm; d1:44.1 mm; B:23.8 mm; s1:27.8 mm; Designation of open end cover:SCOE206-30; Recommended tightening torque for set screw:11.5 Nm; N1:22 mm; J:118 mm;

Bearing Insert Material:Steel; Self Aligning:Yes; Seal Type:Single Lip; Bearing Inner Ring Material:Steel; Brand:Baldor-Dodge; Housing Type:2 Bolt Pillow Block; Bearing Duty:Normal Duty; Bearing Family:Grip Tight Ball Bear; Expansion Type:Non-Expansion; Flinger Type:Rubberized;

d:20 mm; H2:70 mm; E:12.5 mm; H1:10 mm; C:14 kN; A:36 mm; T min.:-20 °C; N:M10; T max.:100 °C; H:36.5 mm;

A2:21 mm; T min.:-40 °C; H1:76 mm; Designation of closed end cover:SCCE204; Designation of housing:T204N-; A1:12 mm; L1:61 mm; L2:10 mm; S:17 mm; Z:62.7 mm;

J:94.5 mm; H2:63.7 mm; s1:15.5 mm; C:12.8 kN; Designation of housing:PLE204N-; Designation of open end cover:SCO204-15; A1:22.5 mm; H:31.8 mm; A:32 mm; G:M6x1;

A1:18 mm; H:190 mm; d:49.21 mm; A2:54.6 mm; T max.:100 °C; A:40 mm; T min.:-40 °C; L:115 mm; s1:21.75 mm; J:157 mm;

S:18.2 mm; C:19.5 kN; T max.:100 °C; A:37 mm; SW:4 mm; H1:89 mm; A5:18.2 mm; d1:44.1 mm; N1:16 mm; A1:12 mm;

Designation of housing:SFL207-; S:8.5 mm; Designation of bearing:SES207; B1:38.9 mm; H:156 mm; C:20.1 kN; N:16mm; J:130 mm; T max.:100 °C; C0:15.6 kN;

Designation of bearing:ES212G2T20; T min.:-20 °C; N:18mm; H:69.9 mm; L:240 mm; B:33.4 mm; N1:28 mm; C0:32.8 kN; B1:49.3 mm; d:60 mm;

Ship Weight:3.69 LB; Ball Bearing Housing Series:207 Series; Ring Size:Standard; Bearing Insert Material:Steel; Base to Center Height:Not Applicable; Flinger Type:Rubberized; Self Aligning:Self Centering; Manufacturing Plant Location:Rogersville, TN; Anti-Rotation Pin:Yes; Bearing Outer Ring Materia

d:40 mm; ra max:1 mm; Nref:9,300 rpm; da min:46.5 mm; Max operating temperature, Tmax:120 °C; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:5.39 Hz; Da max:73.5 mm; Characteristic cage frequency, FTF:0.4 Hz; Fatigue limit load, Cu:0.81 kN;

H3:62; Designation of housing:FCE204-; A2:20.3 mm; Designation of bearing:UC201-08G2T04; T max.:100 °C; C0:6.65 kN; Weight:0.61 kg; e:2 mm; G:M6x1; d:12.7 mm;